Steven Dutch, Professor Emeritus, Natural and Applied Sciences, University of Wisconsin - Green Bay
This is a very simple problem if we recall that structure contours are always parallel and equally spaced. The other structure contours will be parallel to our given contour, so the only real problem is to find the dip.
To determine the dip of the bed, we need to draw a line through the additional point (P) and perpendicular to the structure contour. There are two ways of doing this: 1. Use a right angle like the corner of an index card or a draftsman's triangle to draw the perpendicular. 2. Use a compass: |
1. Find the strike and dip of the limestone layer from the data at left. 2. Find the dip either by drawing a cross-section or by trigonometry. 3. With the dip known, find the map spacing between contours using either cross-section or trigonometry. 4. Construct other contours parallel to the known contour and with the correct spacing. |
Return to Course Syllabus
Return to Techniques Manual Index
Return to Professor Dutch's Home Page
Created 5 January 1999, Last Update 12 June 2020